Support in english
Post Reply
Posts: 3
Joined: Wed 28. Mar 2012, 22:24


Post by jaloser » Mon 9. Apr 2012, 08:09

Hi all,

To start with, I am pretty much a Electronics NEWBIE so I may be missing something. (likely between the ears)

Upon comparing each board's BOM (v3 boards) to the parts list, I fail to find the following components in the parts list.

From the BOM of MD01_03

Code: Select all

R4	10K	PT10LV
Using Mouser#: 531-PT10V-10K

From the BOM on MD02_03

Code: Select all

C2	100NF	2,54X5,08_RM5,08
C3	100NF	2,54X5,08_RM5,08
C4	100NF	2,54X5,08_RM5,08
From the BOM of MD03_03

Code: Select all

C6	100NF	2,54X5,08_RM5,08
C7	100NF	2,54X5,08_RM5,08
C8	100NF	2,54X5,08_RM5,08
After some searching and translating on this site I believe they are the following:

Code: Select all

	Item	Conrad	Reichelt	Mouser
	0.1µF	459830	MKS-2-5 100N	505-MKS2.1/63/5
Is this correct for all 6 (3xMD02_03, 3xMD03_03) ??

If not, What would be a Conrad, RS Comp. or Mouser part number (perferably Mouser) ??

The following items are listed in the MD03 parts list under Sensor, yet unable to account for them on the boards/BOMs.

Code: Select all

Quanity:	Item:	RS Comp.:	Digi-key:	Mouser:
3x		0.1µF	334-300		495-2481-ND	871-B32529C1104K289
And finaly to clearify one other item on MD02_03, If I understand this Partslist thread correctly, the 470µF cap at C1 is an error and it should be a 220µF.
The 220µF is the correct one ??

Thank you


Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest