Page 1 of 1

Bluetooth for Gen 1

Posted: Thu 12. Aug 2010, 12:40
by designer2k2
Hello,

to get the n900 UI running the data needs to be send over bluetooth to the N900 (or an PC)

to add bluetooth to basically every arduino look here: http://blogs.nokia.com/pushn900/wp-cont ... dev1.0.pdf

Link for the Sparkfun Bluetooth serial modem: http://www.sparkfun.com/commerce/produc ... cts_id=582
ardblue.JPG
ardblue.JPG (20.93 KiB) Viewed 4314 times
its connectet to the RX/TX pins from the Arduino, so on the MD01 Print just solder it to the unused pins, also 5V is avaiable there.

[more detailed instructions follow once i receive the Bluetooth dongle]

Steff