Bluetooth for Gen 1

[designer2k2]

Hello,

to get the n900 UI running the data needs to be send over bluetooth to the N900 (or an PC)

to add bluetooth to basically every arduino look here: http://blogs.nokia.com/pushn900/wp-cont ... dev1.0.pdf

Link for the Sparkfun Bluetooth serial modem: http://www.sparkfun.com/commerce/produc ... cts_id=582

ardblue.JPG (20.93 KiB) Viewed 20685 times

its connectet to the RX/TX pins from the Arduino, so on the MD01 Print just solder it to the unused pins, also 5V is avaiable there.

[more detailed instructions follow once i receive the Bluetooth dongle]

Steff