Page 1 of 1

Bluetooth for Gen 1

Posted: Thu 12. Aug 2010, 12:40
by designer2k2

to get the n900 UI running the data needs to be send over bluetooth to the N900 (or an PC)

to add bluetooth to basically every arduino look here: ... dev1.0.pdf

Link for the Sparkfun Bluetooth serial modem: ... cts_id=582
ardblue.JPG (20.93 KiB) Viewed 18337 times
its connectet to the RX/TX pins from the Arduino, so on the MD01 Print just solder it to the unused pins, also 5V is avaiable there.

[more detailed instructions follow once i receive the Bluetooth dongle]