Bluetooth for Gen 1
Posted: Thu 12. Aug 2010, 12:40
Hello,
to get the n900 UI running the data needs to be send over bluetooth to the N900 (or an PC)
to add bluetooth to basically every arduino look here: http://blogs.nokia.com/pushn900/wp-cont ... dev1.0.pdf
Link for the Sparkfun Bluetooth serial modem: http://www.sparkfun.com/commerce/produc ... cts_id=582
its connectet to the RX/TX pins from the Arduino, so on the MD01 Print just solder it to the unused pins, also 5V is avaiable there.
[more detailed instructions follow once i receive the Bluetooth dongle]
Steff
to get the n900 UI running the data needs to be send over bluetooth to the N900 (or an PC)
to add bluetooth to basically every arduino look here: http://blogs.nokia.com/pushn900/wp-cont ... dev1.0.pdf
Link for the Sparkfun Bluetooth serial modem: http://www.sparkfun.com/commerce/produc ... cts_id=582
its connectet to the RX/TX pins from the Arduino, so on the MD01 Print just solder it to the unused pins, also 5V is avaiable there.
[more detailed instructions follow once i receive the Bluetooth dongle]
Steff